Extra ideas with Flaxcord
14-01-2019
Mandy
33118
- Cut a heart from cardboard.
- Glue the end of the Flaxcord or rope on the heart with adhesive tape or glue.
- Place the Flaxcord or rope over the heart.
- Repeat this and move the Flaxcord or rope in between to finally completely cover the cardboard everywhere and along the edges.
- Put the last thread on top of the heart, in the middle, and make a knot.
- Cut a heart from paper and place dots on the wooden disc with a marker.
- Hammer short nails on these dots.
- Twist the first piece of Flaxcord or rope around a nail and secure it with a knot.
- Now go back and forth zigzagging, from side to side, from top to bottom etc. Until all the nails are covered with flaxcord.
- Cut the Flaxcord or rope generously and make a knot around a nail.
- Now cut the Flaxcord briefly and if necessary apply a drop of glue.
info@evelinesdesign.com
+31(0)38 3756780
Copyright 2024, Evelines Design
