Source of image material: Handwerkspecial Scala publisher

1 Cut a piece of 30 x 70 cm from the grid material. Please note that you cut all sides nicely straight. Measure 1 row of blocks in the piece as an "overlap" and secure it with a wax cord.

2 You now have 2 open sides: for the bottom and for the opening at the top of the bag.
Thread the yarn from the open side with the thickest crochet hook.

3 From one open side with the thickest crochet hook, thread the yarn through and continue through to the bottom of the other open side. Do not bind the yarn yet. Before you begin to fix the bottom with the pre-drilled holes, first make the 4 holes for the impact points.

4 Do this with a learning tool, an awl or with the tip of a sharp pair of scissors.

5/6 Attach the metal bumps and then thread the bottom with the wax cord.

7/8 Then repeat the wrapping with the yarn again and then bind it off. You will then no longer see the wax cord and / or the holes.
Finish the open side at the top by sticking around the mesh. Attach the handles to the bag.