Extra ideas with Flaxcord
14-01-2019 Mandy
5651
  
  • Cut a heart from cardboard.
  • Glue the end of the Flaxcord or rope on the heart with adhesive tape or glue.
  • Place the Flaxcord or rope over the heart.
  • Repeat this and move the Flaxcord or rope in between to finally completely cover the cardboard everywhere and along the edges.
  • Put the last thread on top of the heart, in the middle, and make a knot.
  • Cut a heart from paper and place dots on the wooden disc with a marker.
  • Hammer short nails on these dots.
  • Twist the first piece of Flaxcord or rope around a nail and secure it with a knot.
  • Now go back and forth zigzagging, from side to side, from top to bottom etc. Until all the nails are covered with flaxcord.
  • Cut the Flaxcord or rope generously and make a knot around a nail.
  • Now cut the Flaxcord briefly and if necessary apply a drop of glue.
Necessities
8470 - Kippers - Wooden disc ± 14 - 16cm

5.85

Kippers

± 14 - 16cm
1150S.2504/28 - Vivant - Flaxcord Bordeaux

3.90

Vivant

25mtr x 3.5mm
1150S.2504/37 - Vivant - Flaxcord Lavender

3.90

Vivant

25mtr x 3.5mm
1150S.2504/45 - Vivant - Flaxcord Turquoise

3.90

Vivant

25mtr x 3.5mm
1150S.2504/46 - Vivant - Flaxcord Sea Blue

3.90

Vivant

25mtr x 3.5mm
1150S.2504/54 - Vivant - Flaxcord Salmon

3.90

Vivant

25mtr x 3.5mm
1150S.2504/55 - Vivant - Flaxcord Yellow

3.90

Vivant

25mtr x 3.5mm
1150S.2504/70 - Vivant - Flaxcord Ecru

3.90

Vivant

25mtr x 3.5mm
1150S.2504/72 - Vivant - Flaxcord Nature

3.90

Vivant

25mtr x 3.5mm
1150S.2504/75 - Vivant - Flaxcord Dark Brown

3.90

Vivant

25mtr x 3.5mm
1150S.2504/80 - Vivant - Flaxcord Grey

3.90

Vivant

25mtr x 3.5mm
Question and answer
Login to ask a question